Anmol Chemicals is a company in Group, established in 1976, is the pioneer manufacturer of Sodium Acetate, Zinc Chloride etc. It has (FDA) cGMP and GLP approval, ISO-9001 Certificate, "REACH" registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home -------------- Contact

Sodium Acetate Trihydrate Anhydrous AR Pharma

GRADES AND SPECIFICATIONS OF SODIUM ACETATE TRI-HYDRATE CRYSTALS

SPECIFICATIONS SODIUM ACETATE TRIHYDRATE PURE
Assay 99% Sodium Acetate Trihydrate minimum
Appearance White Transparent Crystalline
Test Solution A 10% Solution is clear & colourless
pH 7.5-9
Arsenic Less than 1 ppm
Calcium & Magnesium Less than 50 ppm
Heavy Metals Less than 1 ppm
Iron Less than 5ppm
Chlorides Less than 0.03%
Sulphates Less than 0.02%
Packing As required

GRADES AND SPECIFICATIONS OF SODIUM ACETATE ANHYDROUS POWDER.

SPECIFICATIONS SODIUM ACETATE ANHYDROUS PURE
Purity 99 % minimum purity as CH3COONa
Appearance Snow-White Powder
Clarity of 10% Solution A 10% Solution w/v is clear and colourless
pH (10% in water) pH between 7.5-9
Arsenic Arsenic < 1ppm.
Calcium and Magnesium To pass the test 50 ppm
Heavy Metals Heavy Metals < 1ppm
Iron Iron < 5ppm
Chloride Chloride < 100ppm
Sulphate < 225ppm Sulphate < 20ppm
Packing As required

We offer Sodium Acetate IP Sodium Acetate BP Sodium Acetate USP Sodium Acetate Ph. Eur. and Extra Pure from a world class FDA approved, ISO-9001-2008 Certified facility

SODIUM ACETATE IP PHARMA GRADE

PARTICULARS SODIUM ACETATE IP GRADE
Dry Basis Assay 99 to 101%
Characteristics Colourless Crystals
Solubility Soluble in 0.8 part of water and in 19 parts of Ethanol (96%)
Clarity and colour of  10% w/v solution Clear and Colourless
Alkalinity (pH of 5% solution) 7.5-9.0
Arsenic 2 ppm
Calcium and Magnesium (calculated as Ca) 50 ppm
Heavy Metals as Lead 10 ppm
Iron 10 ppm
Chloride 200 ppm
Sulphate 200 ppm
Reducing Substances Passes test
Packing In 50 Kg HDPE bag with HMHDPE liner

Sodium Acetate USP Specifications

Sodium Acetate USP
C2H3NaO2·3H2O 136.08

Assay—  Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum
: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2΅ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

For an exhaustive Write-up on Sodium Acetate Manufacture, Specifications, Uses, Applications, MSDS etc. you may visit Sodium Acetate BP USP IP ACS AR & Food Grade

For more contact Sodium Acetate manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Ammonium bromide -- Aluminium chloride -- Aluminum chloride -- Ammonium sulfate  -- Ammonium persulfate -- Barium chloride  -- Calcium propionate -- Calcium Oxide -- Calcium Hydroxide -- Calcium Sulfate -- Calcium saccharate -- Chromium Chloride -- Cupric chloride -- Magnesium Chloride -- Manganese Chloride -- Potassium iodide -- Mono di ammonium phosphate -- Potassium acetate -- Potassium bromide -- Potassium phosphate monobasic dibasic tribasic -- Sodium Bromide -- Sodium Diacetate -- Sodium Hydroxide Pellets -- Sodium phosphate monobasic dibasic tribasic

Product Links: ---- Ammonium Chloride --- Calcium Chloride --- Potassium Chloride --- Sodium Acetate --- Zinc Carbonate --- Zinc Oxide --- Zinc Peroxide --- Zinc Sulfate

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.