Anmol Chemicals is the pioneer manufacturers of Zinc Ammonium Chloride, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Zinc Ammonium Chloride made in an ISO9001, ISO22000 (FSSC22000), cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Zinc Ammonium Chloride is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Zinc Ammonium Chloride Solution SDS GHS, MSDS Sheet
Specifications of Zinc Ammonium Chloride
Zinc Ammonium Chloride SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Galvanizers Flux.
CAS No.: Double Salt: 14639-97-5; Triple Salt: 14639-98-6
EINECS: EC Number: Double Salt: 238-687-6; Triple Salt: 238-688-1
Molecular Weight: Double Salt: 243.30; Triple Salt: 296.76
Chemical Formula: Double Salt: ZnCl2-(NH4Cl)2; Triple Salt: ZnCl2-(NH4Cl)3
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead above.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute Toxicity 4
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 1
Hazardous to the aquatic environment, long-term hazard Category 2
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements
GHS Label Elements
Signal Words: Warning
H302 Harmful if swallowed.
H315 - Causes skin irritation.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P310: Immediately call a POISON CENTER or doctor/ physician.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P404: Store in a closed container.
P501 Dispose of contents/ container to an approved waste disposal plant.
Classification according to Regulation 67/548/EEC or 1999/45/EC:
C-N, R 22-34-50/53
OSHA Hazards: Harmful by ingestion, inhalation and contact; Corrosive.
3. Composition/Information on Ingredients
Ingredient -------------- CAS No. ----
Ammonium Chloride - 12125-02-9 - 28-61%
Zinc Chloride --------- 7646-85-7 -- 39-72%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: -.
5. Fire Fighting Measures
Flammability of the Product: The product is not flammable.
At fire temperatures ammonium chloride begins to corrode metals and may dissociate into ammonia and hydrogen chloride. Mixtures of about 16% to 25% (by volume) ammonia gas in air are flammable.
Auto-Ignition Temperature: NA.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: It emits toxic oxides of carbon and oxides of nitrogen when heated to decomposition.
Fire: The product is not flammable.
Explosion: Slightly explosive in presence of heat.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Small Spill: Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.
US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is (800) 424-8802.
7. Handling and Storage
Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances.
Zinc Chloride is a Toxic Chemical under Section 313 of Title III/SARA, and 40 CFR Part 372.
Ammonium Salts Generate Ammonia in Water. For SARA 313 Requirements, 10% of the Total ammonia present in aqueous ammonia solutions is reportable.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
---- For Ammonium Chloride:
ACGIH: 10 mg/m3 TWA (fume)
20 mg/m3 STEL (fume)
OSHA: 10 mg/m3 TWA
20 mg/m3 STEL
NIOSH: 10 mg/m3 TWA (fume)
20 mg/m3 STEL (fume)
---- For Zinc Chloride:
ACGIH: 1 mg/m3 TWA (fume)
2 mg/m3 STEL (fume)
OSHA: 1 mg/m3 TWA (fume)
2 mg/m3 STEL (fume)
NIOSH: 1 mg/m3 TWA (fume)
2 mg/m3 STEL (fume)
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Clear Liquid.
Solubility: Readily soluble in water
pH: 1 to 5.5 at 10% solution at 25 C (77F)
Density: 1.1 to 1.7
Molecular Weight: As in para1.
Molecular Formula: As in para1.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: NA
Melting Point: NA
Vapor Density (Air=1): No information found
Vapor Pressure (mm Hg): No information found
Evaporation Rate (BuAc=1): No information found
10. Stability and Reactivity
Stability: Zinc ammonium chloride is stable under ordinary conditions of use and storage. The material is delinquent and should be stored in tightly closed containers.
Hazardous Decomposition Products: Involvement in a fire causes decomposition to form hydrogen chloride and ammonia.
Hazardous Polymerization: Will not occur.
Incompatibilities: Concentrated acids, strong bases, silver salts, potassium chlorate, ammonium nitrate, bromine trifluoride and iodine heptafluoride. Ammonium chloride reacts explosively with potassium chlorate or bromine trifluoride, and violently with bromide pentafluoride, ammonium compounds, nitrates, and iodine heptafluoride. Explosive nitrogen trichloride may result from reaction of ammonium chloride and hydrogen cyanide.
Conditions to Avoid: Moisture, Heat, Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
Oral rat LD50 : 1450 mg/kg Investigated as a mutagen for Ammonium Chloride
Oral rat LD50: 350 mg/kg. Investigated as a tumorigen, mutagen, and reproductive effector for Zinc Chloride.
Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Mutagenic for bacteria and/or yeast. May cause damage to blood.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Ammonium chloride (12125-02-9) Test & Species Conditions 24 Hr LC50 Lepomis macrochirus 725 mg/L 96 Hr LC50 Cyprinus carpio 209 mg/L [static] 24 Hr LC50 Daphnia magna 202 mg/L
BOD5 and COD: Not available.
Environmental Fate: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
Classification according to ADR/RID: UN 1840 Zinc chloride, anhydrous, mixture 8 N III
Classification according to IMDG: UN 1840 Zinc chloride, anhydrous, mixture 8 III MARINE POLLUTANT
Classification according to IATA: UN 1840 Zinc chloride, anhydrous, mixture 8 III
15. Regulatory Information
OSHA Hazards: Listed.
This material contains one or more of the following chemicals required to be identified under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4).
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: Yes; Fire: No; Pressure: No; Reactivity: No (Pure / Solid)
Ammonium chloride (12125-02-9)
5000 lb final RQ;
2270 kg final RQ
Zinc chloride (7646-85-7)
1000 lb final RQ;
454 kg final RQ
The following components appear on one or more of the following state hazardous substances list of : CA, MA, MN, NJ, PA, RI
Ammonium chloride, CAS Number 12125-02-9
Zinc chloride, CAS Number 7646-85-7
16. Other Information
EINECS: EC Number: 258-054-8; 238-687-6; 238-688-1; --
N = Dangerous for the environment
H302 = Harmful if swallowed.
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H411 = Toxic to aquatic life with long lasting effects.
R 22 = Harmful if swallowed.
R 36 = Irritating to eyes.
R 34 = Causes burns.
R 50/53 = Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Zinc Ammonium Chloride SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
Zinc Ammonium Chloride BP USP Anhydrous Solution manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
Aluminium chloride -- Aluminum chloride -- Barium chloride -- Calcium Oxide -- Chromium Chloride -- Cupric chloride -- Magnesium Chloride -- Manganese Chloride -- Potassium Bitartrate -- Cream of Tartar
Product Links: ---- Ammonium Chloride --- Calcium Chloride --- Potassium Chloride --- Sodium Acetate --- Zinc Carbonate --- Zinc Oxide --- Zinc Peroxide --- Zinc Sulfate
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.